GFORCE HELMETS / Driving Suits

Side Draft

The G-FORCE Racing Gear SideDraft Helmet provides a forced air option for heated, on-track situations. This is a second generation helmet taken from the Pro Force Air helmet, the SideDraft is a superior design. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon Kevlar® composite blend. The side and front of the helmet is equipped with a low profile quality air intake nozzle that accepts most forced air system hoses and channels the cooled air into the shell. The helmet is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer.

The rear of the helmet is accented with double ridge lines that add both style and strength to the Side Draft's shell. Reinforced mounting points for the Hans® Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Side Air Intake Ventilation System then drawls air around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design.

On the inside, G-FORCE Racing Gear has produced the most user friendly, comfortable helmet on the market. The heart of the Modified helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. The G-78 impact liner is covered by a soft knit, padded CoolTec flame retardant liner for comfort, fit and functionality. A SpecFit Channel has been added to secure placement in the use of seeing or sunglasses. The chin strap in the SideDraft helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar® webbing. The SideDraft helmet carries the Snell SA2010 rating. The G-FORCE Racing Gear SideDraft is the expert professional's choice for comfort inside the car.

Helmet Sizing Chart

GFORCE HELMETS / Driving Suits

Pro Eliminator

A sleek new design from G-FORCE Racing Gear, the Pro Eliminator has provided a new benchmark in quality, functionality and style. From the outside in you will notice the difference. The outer contact shell is made from a low density, lightweight Z38 Fiberglass, Carbon, and Kevlar® composite blend. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Eliminator's shell.

Reinforced mounting points for the Hans® Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125" thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit Shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design.

On the inside, G-FORCE Racing Gear has produced the most user friendly, comfortable helmet on the market. The heart of the Pro Eliminator helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. The G-78 impact liner is covered by a soft knit, hypoallergenic, padded CoolTec, flame retardant liner for comfort and fit. A SpecFit Channel has been added to secure placement in the use of seeing or sunglasses. The chin strap in the Pro Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar® webbing. The Eliminator helmet carries the Snell SA2010 rating. The G-FORCE Racing Gear Pro Eliminator is the professional racer's choice for a clean look with unmatched quality and feel.

 

Part Number	#3023
Size	XSM SML MED LRG XLG XXL
Color	BK WH MB
Rating	SNELL SA2010
Other Info	This helmet is HANS® Friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required.
Racer Net Price	$279.99

To check price, availability, and ordering call Phil's inc. toll-free 1-877-750-7251.

Call for more information on the rest of the GFORCE helmet line.