>
CARS SUVs TRUCKS Off-Road
Contact
Home
Policies

 

 
Phil's Inc. offers the complete line of Light Racing Fabrication Components
 
Rod Ends & Dimple Dies - Jounce Shocks - Coilover Shocks

Light Racing

Light Racing Fabrication Parts
Rod End Receivers - Round

Material Spec: 4140 N Chromoly Steel
Includes Grade 8 Bolt, metal locknut and 2 AN washers
Welds into stock tubing sizes. Cinch bolt maintains high clamping force.
Save even more - order in our Fab Packs - sets of 6


.065" Tube Wall Thickness -
.065" Receivers may be turned down to fit other tubing sizes

RH Thread Part #
15120
15110
15100
15090
15080
LH Thread Part #
15125
15115
15105
15095
15085
Unit of Measure
Each
Each
Each
Each
Each
Thread Size (A)
1/2" - 20
5/8" - 18
3/4" - 16
7/8" - 14
1 1/4" - 12
Outside Dia. (B)
.745"
.870"
1.120"
1.260"
1.760"
Thread Length (C)
1.2"
1.3"
1.4"
1.5"
1.7"
Overall Length (D)
1.813"
1.938"
2.125"
2.250"
2.563"
Clamp Bolt Dia. (E)
0.1875"
0.2500"
0.3125"
0.3125"
0.3125"
Clamp Width (f)
0.745"
0.870"
1.120"
1.260"
1.760"
Bolt, nut and
washers INCLUDED
Gr. 8
Included
Gr. 8
Included
Gr. 8
Included
Gr. 8
Included
Gr. 8
Included

.120" Tube Wall Thickness -
We recommend that .120" Receivers not be turned down

RH Thread Part #
15092
15082
LH Thread Part #
15097
15087
Unit of Measure
Each
Each
Thread Size (A)
7/8" - 14
1 1/4" - 12
Outside Dia. (B)
1.260"
1.760"
Thread Length (C)
1.5"
1.7"
Overall Length (D)
2.250"
2.563"
Clamp Bolt Dia. (E)
0.3125"
0.3125"
Clamp Width (f)
1.370"
1.870"
Bolt, nut and
washers INCLUDED
Gr. 8
Included
Gr. 8
Included

Light Racing Fabrication Parts
Rod End Receivers - Square
Material Spec: 4140 N Chromoly Steel
Includes Grade 8 Bolt, metal locknut and 2 AN washers
Welds into custom plate assemblies. Cinch bolt maintains high clamping force.
Save even more - order in our Fab Packs - sets of 6

 

RH Thread Part # 15170 15160 15150 15140 15130
LH Thread Part # N/A N/A N/A N/A N/A
Unit of Measure Each Each Each Each Each
Thread Size(A) 1/2" - 20 5/8" - 18 3/4" - 16 7/8" - 14 1 1/4" - 12
Width (B) 0.688" 0.875" 1.063" 1.250" 1.813"
Thread Length (C) 1.2" 1.3" 1.4" 1.5" 1.7"
Overall Length (D) 1.813" 1.938" 2.125" 2.250" 2.563"
Clamp Bolt Dia. (E) 0.1875" 0.2500" 0.3125" 0.3125" 0.3125"
Clamp Width (F) 0.688" 0.875" 1.063" 1.250" 1.813"
Bolt, nut & washers included Gr. 8 Included  Gr. 8 Included  Gr. 8 Included  Gr. 8 Included  Gr. 8 Included 

 

PART#
15080
15082
15085
15087
15090
15092
15095
15097
15100
15105
15110
15115
15120
15125
15130
15140
15150
15160
15170
15474
15475
15476
15477
15478
15479
15480
15481
15482
15483
15810
15815
15835
15840
15850
15860
15865
15870
15875
15880
15885
15890

Light Racing Fabrication Parts

 

RH Thread Part # 15474 15476 15478
LH Thread Part # 15475 15477 15479
Bore .50 Bore .625 Bore .750 Bore
Thread Size 1/2"-20  5/8"-18 3/4"-16
Round End Receiver 15120 15110 15100
Part # RH Thread
Round End Receiver 15125 15115 15105
Part # LH Thread
Square End Receiver 15170 15160 15150
Part # RH Thread

 

RH Tread Part # 15480 15482
LH Tread Part # 15481 15483
Bore .875 Bore 1.00 Bore
Thread Size 7/8"-14 1-1/4"-12
Round End Receiver 15090 15080
Part # RH Thread
Round End Receiver 15095 15085
Part # LH Thread
Square End Receiver 15140 15130
Part # RH Thread

Light Racing Dimple Dies

Flared Hole Dies
Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength-to-weight ratio applications promoted by the use of this technique, flared holes are found in many aircraft and race vehicle designs.

Beginning with comprehensive finite element analysis supported by extensive prototype testing, our Flared Hole Dies are engineered to provide the optimum combination of performance attributes.

• Designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges)

• Optimized form (flare angle, bend radius and length of run) provides maximum stiffness and strength

• Manufactured from premium hardened high carbon steel for maximum tool life
• Unique shape for ease of handling

• Up to max sheet thicknesses of .090 for chromoly and .125 for mild steel

Individual Dies 

Part # Width
15835 .75"
15840 1.0"
15850 1.5"
15860 2.0"
15865 2.5"
15870 3.0"
15875 3.5"
15880 4.0"
15885 5.0"
15890 6.0"

Flared Hole Die Sets 
Part # Dies Included
15810 15835, 15840, 15850, 15860, 15865
15815 15870, 15875, 15880

Phil's Inc. Homepage

(prices subject to change without notice)


 
Phil's Incorporated - 2204 Ashland Ave. Evanston, IL 60201 - (847) 869-2434 toll-free - (877)750-7251 - fax (847) 869-2498
email:
philsinc@ymail.com