Centric PartsSemi-Loaded Calipers
Centric semi-loaded calipers are remanufactured to meet our exacting standards ensuring worry free performance for the life of the caliper. Each Centric caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Centric semi-loaded calipers include hardware and brackets where applicable. Centric offers a wide variety of friction options that compliment these semi-loaded calipers.

All new pistons Every piston phenolic or steel is replaced to guarantee proper performance throughout the lifetime of the caliper.		New Boots and Seals Posi Quiet calipers come complete with all new dust seals, O-rings and boots.
New Hardware Posi Quiet calipers have all new hardware installed. All guide bolts, pins, through bolts and seals are replaced guaranteeing the caliper will function correctly.		Less Noise Posi Quiet calipers utilize the new Quiet Clips™ style abutment clips. These quiet clips ensure proper pad fitment and reduced vibration related noise under braking.

Centric Parts has gone to great lengths to maintain its advantage above the competition by utilizing the latest machinery, processes and our custom built testing equipment. Centric Parts is the industry leader in remanufactured brake calipers
After each caliper core is inspected and identified, it is disassembled. All rubber seals, boots and hardware are discarded.Each reusable component is inspected, cleaned and refinished to ensure maximum life.
After tear-down each caliper core is heated to over 500 degrees. This process burns off any residual oils, grease or brake fluid leaving a clean caliper body.
Parts are then tumble blasted with steel shot to further clean any rust or scale left on the calipers. Parts leave the shot blaster as clean as a new part from the foundry.
After shot blasting, all calipers are treated with an anti-corrosion finish. This aqueous based solution prevents rust and preserves shelf life.
Each caliper is thoroughly inspected before being sent for reassembly.
Every threaded port or bleeder hole has the threads chased to eliminate cross threading during installation. This process also ensures leak free performance for the life of the caliper.
All bores are brushed and  cleaned to ensure proper fitment and performance of the new boot and seal.
Th    e new piston, boot and seal are installed using appropriate lubricant and is done  according to original manufacturing specifications.
After assembly EVERY CALIPER is tested on Centric’s custom designed pressure tester. No caliper gets packaged without first getting the green light from our testing equipment. This ensures that Centric Calipers will work to original specifications right out of the box.
After receiving the green light from our testing equipment all caliper identities are confirmed. Then they are boxed, labeled and shipped