Sportstop Brake Rotors - Stop Tech Brake Lines - Stop Tech Street Performance Brake Pads

SportStop Rotors
Cross drilled or drilled and slotted brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance. The addition of high performance street pads provide you with higher resistance to fade, higher maximum operating temperature, and better initial bite to allow consistent deep braking into corners. Motul RBF600 brake fluid increases both wet and dry boiling points and prevents boiling even under the most severe operating conditions. Good for street and autocross.

Not for extended track sessions.

Most SportStop performance rotors feature our special Power Alloy metallic compound.
• Superior resistance to cracking due to thermal stress
• Increased molybdenum content that extends reliability, service life and helps reduce NVH “noise” issues
• Rotor material is a direct descendant of the patented AeroRotor from StopTech

Stainless Steel Brake Lines
SportStop stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake  modulation. SportStop brake lines consist of a Teflon® inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. SportStop brake lines feature a Clear Abrasion Resistant Cover for maximum protection against chaffing  
 

Street Performance Brake Friction
StopTech Street Performance brake Pads are engineered to meet the
demands of high performance driving situations while maintaining their ability to work in normal driving conditions. StopTech brake pads combine the benefits of premium street brake pads with aggressive friction formulas suitable for track day and autocross use. Para-Aramid composites deliver optimum stopping performance over a wide temperature range and are specially formulated to deliver linear response in both cold and hot conditions. All StopTech Brake pads are 100% positive molded and include OE style shims to eliminate noise associated with brake pad vibration. In addition each StopTech brake pad is scorched to remove any impurities in the friction material. While this does not eliminate the need to bed-in new pads it does provide improved stopping power right out of the box.