-
 
|
-
Why do you need a Gated Boost Control
Valve (GBCV)?
Increasing boost pressure is often the most cost effective increase in
horsepower
A Turbosmart GBCV will allow boost pressure to be adjusted above the
standard setting
To avoid using un-reliable methods of increasing Boost, such as shortening
the actuator rod. This causes spring bind in the actuator and restricts
flow through the wastegate.
It avoids having to replace wastegate springs, which only give a fixed
increase, which is not adjustable.
-
Why choose a Turbosmart GBCV?
All our GBCV’s feature the Gated System - unique to Turbosmart. This
delays the pressure signal from entering the wastegate, which inturn
spools up the turbo faster, resulting in more boost at lower RPM.
Setting the desired boost pressure is made easy. Simply adjust the Boost
Dial on the top of the unit, without the need for any tools.
Turbosmart Boost controllers are capable of increasing boost pressure to
the threshold of your turbo’s capacity
All Turbosmart GBCV’s can be locked to prevent tampering
All Turbosmart GBCV’s come with comprehensive installation instructions
|
- BLOW OFF VALVES ||
WASTEGATES || BOOST CONTROLLER
ULTRA GATE - 35mm Wastegate
Ultra compact, Ultra flow, Ultra Value!
The most compact 35mm wastegate on the market,
featuring the common two bolt flange design used by many turbo kit
manufacturers. The Ultra-Gate’s design incorporates a unique
temperature isolation zone to reduce heat transfer, a true 35mm inlet
port for maximum flow, an investment cast Stainless Steel body and
one-piece valve for strength and reliability. We have successfully
used one Ultra-Gate on engines producing up to 600HP, however in
applications where the turbo is not suitably matched to the engine,
this figure may not be achievable.
-
Ultra compact 112mm overall height (4 ˝ inch)
and 100mm across (4 inch)
-
17-7 PH spring and Silicone Nomex diaphragm -
durability under extreme temperatures and stress
-
Optimum actuator to valve ratio for precise
boost control
-
Superior body design and huge valve lift ensure
unrivalled flow
-
Supplied with weld on steel manifold flanges and
gaskets
-
Fully compatible with all Turbosmart Boost
Controllers
p/n: F-WGATE-35
PRO GATE - 45mm WastegateThe professional’s choice
for Horsepower!
Time proven reliability and extreme performance has
made the Turbosmart Pro-Gate the external wastegate of choice by many
of the world’s fastest drag racers and builders of hardcore horsepower
machines. The Pro-Gates design includes an investment cast Stainless
Steel body, a one-piece valve for strength and reliability and the
unique temperature isolation zone to reduce heat transfer. The
Pro-Gate is supplied complete with a cast Stainless Steel Vee-band
adapter kit for quick and easy installation. We have successfully used
one Pro-Gate on engines producing up to 1000HP, however in
applications where the turbo is not suitably matched to the engine,
this figure may not be achievable.
-
Race proven winner! Drag racers choice!
-
Extensively developed body design and huge valve
lift ensure unrivalled flow
-
17-7 PH spring and Silicone Nomex diaphragm -
durability under extreme temperatures and stress
-
Optimum actuator to valve ratio for precise boost
control
-
Fully compatible with all Turbosmart Boost
Controllers
-
Supplied with Vee-bands and weld flanges
p/n FG-WGATE-45
- BOOST TEE
Set your Boost and forget it
Boost is fully adjustable from under the bonnet
Detent System for ease of adjustment
Gated System to bring boost on faster
- p/n: FG-GBCV-BT
- IN CABIN
Designed to be mounted inside the cabin and allows for boost
adjustment on the run. Ideal for the active enthusiast.
Control boost from the drivers seat
Detent System for ease of adjustment
Gated System to bring boost on faster
Mounting bracket, hose and all fitting hardware supplied.
- p/n: FG-GBCV-IC
-
|
